1. GENERAL SPECIFICATION

ITEM			UNIT	SPECIFICATION			SELECTION
				HEIDENHAIN
CAPACITY	TABLE SURFACE		mm	T-SLOT			DEFAULT
	TABLE SIZE		mm	Φ800x680
	MAX. WORKPIECE DIAMETER		mm	Φ1000
	MAX. WORKPIECE HEIGHT		mm	590
	MAX. WORKPIECE WEIGHT		kg	1400
	SPINDLE TO TABLE SURFACE		mm	155 ~ 840
MAIN DIMENSION		LENGTH	mm	4097			DEFAULT
		WIDTH	mm	2950
		HEIGHT	mm	3670
MACHINE WEIGHT(NET)⁽¹⁾			kg	25000			DEFAULT
UTILITY	CONTROL POWER	VOLT/FREQUENCY	V / Hz	200 / 50			OPT.	SELECTIVE
				220 / 60			STD.
				380 / 50,60			OPT.
				400 / 50,60			OPT.
				415 / 50,60			OPT.
				440 / 50,60			OPT.
		PHASE	PH	3			DEFAULT
	REQUIRED POWER CAPACITY⁽²⁾		kVA	100 (2-1)	120(2-2)		SELECTIVE
	COMPRESSED AIR	PRESSURE	MPa	0.54			DEFAULT
		CONSUMPTION	NL/min	800, 600 ⁽³⁾			DEFAULT
MACHINE COLOR				DOOSAN 4 TONE COLORMT DARK GRAY(5.3PB 3.0 / 0.4) MT MIDDLE GRAY(1.4RP 4.8 / 0.1) MT LIGHT GRAY(7.3B 7.8 / 0.4) MT BLUE(6.1PB 5.9 / 7.6)			STD.	SELECTIVE
CNC SYSTEM	MODEL			DOOSAN FANUC i FANUC 31i5		HEIDENHAIN TNC640	SELECTIVE	STD.

(1) SPECIFIED WEIGHT IS BASED ON THE MACHINE WITH EXPORT STANDARD SPECIFICATION AND INCLUDING STANDARD ACCESSORIES AND EQUIPMENT.

(2) THIS VALUE IS BASED ON THE MACHINE WITH STANDARD SPECIFICATION AND DEPEND ON SPINDLE MOTOR POWER. (2-1) FOR TYPE 1, TYPE 2 (2-2) FOR TYPE 3, TYPE 4

(3) FOR ROTARY TABLE AIR CURTAIN

2. SPINDLE HEAD

ITEM			UNIT	SPECIFICATION	SELECTION
SPINDLE	TYPE1_FANUC	POWER(CONT./SHORT)	kW	22(S3 25%) / 18.5(CONT.)	SELECTED
		MAX. SPINDLE SPEED	r/min	12000
		BASE SPEED	r/min	865
		MAX. TORQUE(SHORT TERM)	N·m	204(S3 25%)
		ORIENTATION		BUILT-IN SENSOR
		POWER TRANSMISSION		BUILT-IN DRIVE
	TYPE2_FANUC	POWER(CONT./SHORT)	kW	22(S3 25%) / 18.5(CONT.)
		MAX. SPINDLE SPEED	r/min	18000
		BASE SPEED	r/min	1800
		MAX. TORQUE (SHORT TERM)	N·m	118(S3 25%)
		ORIENTATION		BUILT-IN SENSOR
		POWER TRANSMISSION		BUILT-IN DRIVE
	TYPE3_HEIDENHAIN	POWER(CONT./SHORT)	kW	24/30(S6 40%)
		MAX. SPINDLE SPEED	r/min	12000
		BASE SPEED	r/min	1890
		MAX. TORQUE (SHORT TERM)	N·m	155(S6 40%)
		ORIENTATION		BUILT-IN SENSOR
		POWER TRANSMISSION		BUILT-IN DRIVE
	TYPE4_HEIDENHAIN	POWER(CONT./SHORT)	kW	24/30(S6 40%)
		MAX. SPINDLE SPEED	r/min	18000
		BASE SPEED	r/min	1890
		MAX. TORQUE (SHORT TERM)	N·m	155(S6 40%)
		ORIENTATION		BUILT-IN SENSOR
		POWER TRANSMISSION		BUILT-IN DRIVE
SPINDLE TOOL CLAMPING FORCE			kN	9.8 (21)⁽¹⁾	DEFAULT
TAPER TYPE				#40, 7/24 TAPER	DEFAULT
COOLING	TANK CAPACITY		L	100	DEFAULT
COOLING	CAPACITY		kcal/h	9,030	DEFAULT

(1) IN CASE OF HSK SPINDLE, TOOL CLAMPLING FORCE IS 21kN

返回
列表

上一条CNC加工中心新手必学的基础知识，切削量和进给量不能少

下一条卧式加工中心销售-HP5100卧式加工中心【斗山机床（中国）销售-服务】